R&S RTO6 - 5.5.3 Probes settings; 5.5.4 Other settings

Acquisition and waveform setup
R&S
®
RTO6
142User Manual 1801.6687.02 ─ 05
"20 MHz, 200 MHz, 800 MHz"
Frequencies above the selected limit are removed to reduce noise at
dif
ferent levels.
Remote command:
CHANnel<m>:BANDwidth
on page 1340
Effective bandwidth
Displays the effective bandwidth.
5.5.3 Probes settings
See Chapter 5.6, "Probes", on page 145.
5.5.4 Other settings
Access: "Menu" > "Vertical" > "Other"
External attenuation: Scale, Attenuation
Consider a voltage divider that is part of the DUT before the measuring point. The
external attenuation is included in the measurement, and the instrument shows the
results that would be measured before the divider. External attenuation can be used
with all probes.
"Scale"
Select linear or logarithmic attenuation scale.
V
ertical setup