R&S RTO6 - 24.17.4.4 SPI search settings

Remote control commands
R&S
®
RTO6
1720User Manual 1801.6687.02 ─ 05
BUS<m>:SPI:FRAMe<n>:WORD<o>:MOSI?
Returns the data value of the specified word on the MOSI line.
Suffix:
<m>
.
1..4
Selects the serial bus.
<n> *
Selects the frame.
<o> *
Selects the word number.
Return values:
<MOSIV
alue> To set the value format, use FORMat:BPATtern
.
The values below – range, increment and reset – are decimal
values.
Range: 0 to 4294967295
*RST: 0
Usage: Query only
BUS<m>:SPI:FRAMe<n>:WORD<o>:FMOSi?
Returns the formatted value of the specified word on the MOSI line.
Suffix:
<m>
.
1..4
Selects the serial bus.
<n> *
Selects the frame.
<o> *
Selects the word number
.
Return values:
<FormattedMOSIV
al>
Usage: Query only
24.17.4.4 SPI search settings
In search setup commands, you must specify the <SearchName> parameter. It is a
string parameter that contains the search definition name. All commands are similar to
SPI trigger commands.
SEARch:TRIGger:SPI:TYPE......................................................................................... 1721
SEARch:TRIGger:SPI:FCONdition.................................................................................1721
SEARch:TRIGger:SPI:MISopattern................................................................................1722
SEARch:TRIGger:SPI:MOSipattern............................................................................... 1722
SEARch:TRIGger:SPI:DPOPerator................................................................................1722
Protocols