R&S RTO6 - 24.17.26.4 Search settings

Remote control commands
R&S
®
RTO6
2341User Manual 1801.6687.02 ─ 05
Return values:
<Byte> Range: 0 to 0
Increment: 1
*RST: 0
Usage: Query only
BUS<m>:EBTB:SYMBol<n>:KDCode?
Returns the K/D code.
Suffix:
<m>
.
1..4
<n> *
Return values:
<KDCode>
Usage: Query only
BUS<m>:EBTB:SYMBol<n>:TENBit?
Returns the 10-bit symbol.
Suffix:
<m>
.
1..4
<n> *
Return values:
<TenBit>
Usage: Query only
24.17.26.4 Search settings
SEARch:TRIGger:
EBTB:DISParityerr.............................................................................2341
SEARch:TRIGger:EBTB:DX..........................................................................................2342
SEARch:TRIGger:EBTB:DY..........................................................................................2342
SEARch:TRIGger:EBTB:EBPA...................................................................................... 2342
SEARch:TRIGger:EBTB:GLITcherror............................................................................. 2342
SEARch:TRIGger:EBTB:STYPe.................................................................................... 2343
SEARch:TRIGger:EBTB:SYME..................................................................................... 2343
SEARch:TRIGger:EBTB:SYMType................................................................................ 2343
SEARch:TRIGger:EBTB:TBPA...................................................................................... 2344
SEARch:TRIGger:EBTB:TYPE......................................................................................2344
SEARch:TRIGger:EBTB:UNK........................................................................................2344
SEARch:TRIGger:EBTB:DISParityerr <SearchName>,<DispError>
SEARch:TRIGger:EBTB:DISParityerr? <SearchName>
Defines, if a search for any disparity error is activated or not.
Protocols