R&S RTO6 - 24.17.17.5 Search results

Remote control commands
R&S
®
RTO6
2051User Manual 1801.6687.02 ─ 05
SEARch:TRIGger:MDIO:TYPE <SearchName>,<T
ype>
SEARch:TRIGger:MDIO:TYPE? <SearchName>
Selects the event type to search for
.
Parameters:
<Type> STARt | STOP | DATA
STARt
Searches for the start of frame (SOF).
ST
ARt
Searches for the end of frame (EOF).
DATA
Allows to specify a payload data pattern (both in Clause 22 or
Clause 45) or an address pattern (in Clause 45, only) to search
for.
*RST: STARt
Parameters for setting and query:
<SearchName>
24.17.17.5 Search results
In all SEARch:RESult:
MDIO:WORD<m> commands, the suffix <m> selects the packet
number in the list of search results.
SEARch:RESult:MDIO:WORD<m>:DATA?..................................................................... 2051
SEARch:RESult:MDIO:WORD<m>:PHYS?.....................................................................2052
SEARch:RESult:MDIO:WORD<m>:REGI?..................................................................... 2052
SEARch:RESult:MDIO:WORD<m>:ST?......................................................................... 2052
SEARch:RESult:MDIO:WORD<m>:STARt?.................................................................... 2053
SEARch:RESult:MDIO:WORD<m>:STATe?.................................................................... 2053
SEARch:RESult:MDIO:WORD<m>:STOP?.....................................................................2054
SEARch:RESult:MDIO:WORD<m>:SYMBol?..................................................................2054
SEARch:RESult:MDIO:WORD<m>:TYPE?.....................................................................2054
SEARch:RESult:MDIO:WCOunt?...................................................................................2055
SEARch:RESult:MDIO:WORD<m>:DATA? <SearchName>
Returns the 16-bit payload data field content (in Clause 22 or Clause 45), or the 16-bit
address field content (in Clause 45, only) from the selected word within the search
result.
Suffix:
<m>
.
*
Query parameters:
<SearchName>
Return values:
<Data>
Usage: Query only
Protocols