R&S RTO6 - Page 2050

Remote control commands
R&S
®
RTO6
2050User Manual 1801.6687.02 ─ 05
Parameters for setting and query:
<SearchName>
SEARch:TRIGger:MDIO:PHYS <SearchName>,<PhyAddr>
SEARch:TRIGger:MDIO:PHYS? <SearchName>
Allows to set the physical address (in Clause 22) or port address (in Clause 45) of the
frame pattern (5 bits); available only in search criteria type
"Data".
Parameters:
<PhyAddr>
Parameters for setting and query:
<SearchName>
SEARch:TRIGger:MDIO:REGI <SearchName>,<RegAddr>
SEARch:TRIGger:MDIO:REGI? <SearchName>
Allows to set the register address (in Clause 22) or device address (in Clause 45) of
the frame pattern (5 bits); available only in search criteria type "Data".
Parameters:
<RegAddr>
Parameters for setting and query:
<SearchName>
SEARch:TRIGger:MDIO:ST <SearchName>,<StartCode>
SEARch:TRIGger:MDIO:ST? <SearchName>
Allows to select the start of frame code of the frame pattern; available only in search
criteria type "Data"
.
Parameters:
<StartCode>
ST00 | ST01 | ST0X
ST00
Clause 45
ST01
Clause 22
ST0X
Any permissible start pattern
*RST: ST0X
Parameters for setting and query:
<SearchName>
Protocols