R&S RTO6 - 24.19.5 DC offset alignment

Remote control commands
R&S
®
RTO6
2461User Manual 1801.6687.02 ─ 05
24.19.5 DC offset alignment
GENerator:ALIGnment:DC:ABORt.................................................................................
2461
GENerator:ALIGnment:DC:RESult:DA
TE?......................................................................2461
GENerator:ALIGnment:DC:RESult:TIME?...................................................................... 2461
GENerator:ALIGnment:DC:RESult[:STATe]?................................................................... 2461
GENerator:ALIGnment:DC[:STARt]................................................................................2461
GENerator:ALIGnment:DC:ABORt
Aborts a DC offset alignment.
Usage: Event
GENerator:ALIGnment:DC:RESult:DATE?
Queries the date of the last performed DC offset alignment.
Return values:
<Date>
Usage: Query only
GENerator:ALIGnment:DC:RESult:TIME?
Queries the time of the last performed DC offset alignment.
Return values:
<T
ime>
Usage: Query only
GENerator:ALIGnment:DC:RESult[:STATe]?
Queries the result of a DC offset alignment.
Return values:
<State> P
ASSed | FAILed | NOALigndata
*RST: NOALigndata
Usage: Query only
GENerator:ALIGnment:DC[:STARt]
Starts a DC offset alignment.
Usage: Event
Waveform generator (option R&S RT
O6-B6)