Waveform analysis
R&S
®
RTO6
258User Manual 1801.6687.02 ─ 05
7.3.2 Math setup - general settings
You can define up to eight different math waveforms. Each waveform is defined in a
separate tab in the
"Math"
dialog box ("M1" to "M8").
The settings for input of mathematical formulas are described in separate chapters:
●
Chapter 7.3.3.1, "Settings in the Operator editor", on page
259
●
Chapter 7.3.5, "Filters"
, on page 269
●
Chapter 9.1.3, "FFT configuration settings", on page 378
●
Chapter 7.3.4, "Equation", on page 261
Display........................................................................................................................ 258
Envelope selection......................................................................................................258
Display
If activated, a diagram for the defined math waveform is displayed on the touch screen.
Remote command:
CALCulate:MATH<m>:STATe on page 1456
Envelope selection
Selects the upper or lower part of the waveform for mathematic calculation, or a combi-
nation of both.
Mathematics
To Next Page
Loading...
