R&S RTO6 - 7.3.3 Operator editor; 7.3.3.1 Settings in the Operator editor

Waveform analysis
R&S
®
RTO6
259User Manual 1801.6687.02 ─ 05
The setting is relevant for waveforms with waveform arithmetic mode "Envelope" or
with "Peak detect" decimation. All mathematic operations - except for derivation - can
be applied to envelope waveforms and waveforms with
"Peak detect" decimation.
Remote command:
CALCulate:
MATH<m>:ENVSelection on page 1457
7.3.3 Operator editor
In the Operator editor, you can define the most common mathematical formulas without
knowing their correct syntax.
Remote command:
●
CALCulate:MATH<m>[:
EXPRession][:DEFine] on page 1456
7.3.3.1 Settings in the Operator editor
Source 1 / 2.................................................................................................................260
Type............................................................................................................................ 260
Noise reject................................................................................................................. 260
a / b............................................................................................................................. 260
Mathematics