Pulse source and TDR/TDT analysis (options R&S RTO6-B7/K130)
R&S
®
RT
O6
1051User Manual 1801.6687.02 ─ 05
Measurement type
Selects the analysis type: "TDR"
(time domain reflectometry), "TDT" (time domain
transmission), or "TDR / TDT" (both TDR and TDT).
Remote command:
TDRT:TYPE on page 2467
Calibrate setup
Starts the wizard for manual calibration. In the next steps, you connect several calibra-
tion standards and measure the correction parameters.
Measure with default values
Starts the measurement with default correction values instead of calibrating the setup.
Default values are rough values without time reference.
Remote command:
TDRT:DEFault on page 2466
Open
Opens a saved calibration file of a previous calibration and starts the measurement.
Remote command:
TDRT:CALibration:OPEN:NAME on page 2466
TDRT:CALibration:OPEN[:EXECute] on page 2466
16.2.3.2 Setup: channels
Access: [App Cockpit]> "Analysis" > "TDR / TDT" > "Calibrate setup"
TDR/TDT analysis (option R&S R
TO6-K130)
To Next Page
Loading...
