R&S RTO6 - 24.10.5 XY-Diagram

Remote control commands
R&S
®
RTO6
1465User Manual 1801.6687.02 ─ 05
Suffix:
<m>
.
1..4
Selects the input channel.
<n> 1..3
Selects the waveform. If [:WA
Veform<n>] is omitted, waveform 1
is adressed.
Return values:
<TimeRelativ> Range: -100E+24 to 100E+24
Default unit: s
Usage: Query only
Asynchronous command
CHANnel<m>[:WAVeform<n>]:HISTory:TSRReference?
Returns the relative time of the currently selected acquisition and the internal reference
time (horizontal alignment) in history view with respect to the acquisition with index 0.
Suffix:
<m>
.
1..4
Selects the input channel.
<n> 1..3
Selects the waveform. If [:W
A
Veform<n>] is omitted, waveform 1
is adressed.
Return values:
<TimeRelIntRef> Range: -100E+24 to 100E+24
Increment: 1
*RST: 0
Default unit: s
Usage: Query only
Asynchronous command
Firmware/software: Version 2.70
24.10.5 XY-Diagram
W
AVeform<m>:XYCurve:RATio..................................................................................... 1465
WAVeform<m>:XYCurve:STATe.....................................................................................1466
WAVeform<m>:XYCurve:SWAP.................................................................................... 1466
LAYout:SIGNal:AXIS.....................................................................................................1466
WAVeform<m>:XYCurve:XSOurce.................................................................................1467
WAVeform<m>:XYCurve:YSOurce.................................................................................1467
WAVeform<m>:XYCurve:RATio <ConstantXYRatio>
If enabled, the x- and y-axes maintain a constant ratio in the diagram.
Waveform analysis