Protocol analysis
R&S
®
RTO6
886User Manual 1801.6687.02 ─ 05
Decode Results Table
The results are shown in two tables:
●
"Decode results"
: contains information about all decoded frames
●
"Details frame": contains more detailed information about the selected frame in the
"Decode results"
table.
Table 13-45: Content of the Decode results table
Column Description
State Overall state of the frame
Start Time of frame start in relation to the trigger point
Packet Type Packet type
VC Number of virtual channels
DT Data type
WC/ Data Word count or data value
Number of Packets Number of packets in the frame
Tools
Press "Display settings" in the "Decode Results"
table to access the "Display" tab.
Remote commands
Remote commands are described in Chapter 24.17.24.3, "D-PHY decode results",
on page 2255.
13.23.5
Search on decoded D-PHY data
Using the search functionality, you can find various events in the decoded data. You
can find the same events that you can trigger on, and even many more, since several
event types can also be combined.
Before you can start the search, you have to configure the bus correctly and acquire
decoded data.
To search on decoded data, set the search source to "SerBus" for the configured proto-
col.
D-PHY (option R&S R
T
O6-K580)
To Next Page
Loading...
