Data and file management
R&S
®
RTO6
449User Manual 1801.6687.02 ─ 05
Save to file
The file name to save the data to.
By default, user preference file names have the prefix
"UserPreferences_"
.
"Save"
Saves the data to the selected file.
"Save As..."
Opens the file selection dialog box and saves the data to the selected
file.
".zip"
Shows the file format.
12.1.3.2 Load user preference settings
Access: "Menu" key > "Save/Recall" key > "Recall" tab > "User Preferences"
Load from file
Enter the file name to load the setting data from, and select the file format with the for-
mat button on the right. Double-tap the file name to open the file selection dialog box.
See also: Chapter 12.5, "File selection dialog", on page 482.
By default, user preference file names have the prefix "UserPreferences_".
"Open"
Opens a file selection dialog box and loads the selected file.
Remote command:
MMEMory:RCL
on page 1646
12.1.4 Saveset with preview function
Access: "Menu" > "Save/Recall" > "Recall" tab > "Saveset with preview"
The graphical preview helps you to find the required settings file or a reference wave-
form.
The "Saveset with preview" function is also available on the toolbar, see Chap-
ter 3.3.6.3, "Toolbar functions", on page 53.
Save and recall user settings
To Next Page
Loading...
