Remote control commands
R&S
®
RTO6
1996User Manual 1801.6687.02 ─ 05
SEARch:TRIGger:ARINc:ERRor:TIMing <SearchName>,<MinGapSelect>
SEARch:TRIGger:ARINc:
ERRor:TIMing
? <SearchName>
Enables the search for timing errors, when the minimum gap is out of range.
Parameters:
<MinGapSelect> ON | OFF
*RST: ON
Parameters for setting and query:
<SearchName>
24.17.14.5 Search results
The search on decoded ARINC 429 data returns the same results as the queries for
decode results.
In search result commands, you have to specify the <SearchName> parameter. It is a
string parameter that contains the search definition name.
For a description of the returned values, see the corresponding commands in Chap-
ter 24.17.14.3, "Decode results",
on page 1989.
SEARch:RESult:ARINc:WORD<m>:LABel?....................................................................1996
SEARch:RESult:ARINc:WORD<m>:PATTern?................................................................ 1996
SEARch:RESult:ARINc:WORD<m>:DATA?.................................................................... 1997
SEARch:RESult:ARINc:WORD<m>:SSM?..................................................................... 1997
SEARch:RESult:ARINc:WORD<m>:SYMBol?.................................................................1997
SEARch:RESult:ARINc:WCOunt?..................................................................................1998
SEARch:RESult:ARINc:WORD<m>:STOP?....................................................................1998
SEARch:RESult:ARINc:WORD<m>:SDI?.......................................................................1998
SEARch:RESult:ARINc:WORD<m>:STATe?................................................................... 1998
SEARch:RESult:ARINc:WORD<m>:STARt?................................................................... 1999
SEARch:RESult:ARINc:WORD<m>:LABel? <SearchName>
Suffix:
<m>
.
*
Query parameters:
<SearchName>
Return values:
<Label> Range: 0 to 255
Increment: 1
*RST: 0
Usage: Query only
SEARch:RESult:ARINc:WORD<m>:PATTern? <SearchName>
Suffix:
<m>
.
*
Protocols
To Next Page
Loading...
