R&S RTO6 - 24.17.23.5 Search results

Remote control commands
R&S
®
RTO6
2237User Manual 1801.6687.02 ─ 05
Parameters:
<IndexMin> Specifies the index value or the start value of an index range
within the field.
The index range, increment and *RST values depend on the
field type.
Parameters for setting and query:
<SearchName> String with the name of the search.
SEARch:TRIGger:USBPd:IOPerator <SearchName>,<Frame>, <Field>, <Operator>
SEARch:TRIGger:USBPd:FRAMe<m>:FLD<n>:IOPerator
<SearchName>,<IndexOperator>
SEARch:TRIGger:USBPd:FRAMe<m>:FLD<n>:IOPerator? <SearchName>
Sets the operator for the index for searching in the selected field of the selected frame.
Suffix:
<m>
.
*
Specifies the frame.
<n> *
Specifies the field number within the frame.
Parameters:
<IndexOperator> EQUal | INRange | RANGe
EQUal
This condition requires one endpoint value to be set using
SEARch:
TRIGger:USBPd:
FRAMe<m>:FLD<n>:IMIN.
INRange | RANGe
This condition requires a range of endpoint values to be set
using SEARch:TRIGger:USBPd:FRAMe<m>:FLD<n>:IMIN
and SEARch:TRIGger:USBPd:FRAMe<m>:FLD<n>:IMAX.
*RST: INRange
Parameters for setting and query:
<SearchName> String with the name of the search.
24.17.23.5 Search results
In all SEARch:RESult:
USBPd:FRAMe<m> commands, the suffix <m> selects the
frame number in the list of search results.
SEARch:RESult:USBPd:FCOunt?................................................................................. 2238
SEARch:RESult:USBPd:FRAMe<m>:DATA?.................................................................. 2238
SEARch:RESult:USBPd:FRAMe<m>:FLD<n>:FVAL?...................................................... 2238
SEARch:RESult:USBPd:FRAMe<m>:FLD<n>:STATus?...................................................2239
SEARch:RESult:USBPd:FRAMe<m>:FLD<n>:STARt?.....................................................2239
SEARch:RESult:USBPd:FRAMe<m>:FLD<n>:STOP?.....................................................2239
SEARch:RESult:USBPd:FRAMe<m>:FLD<n>:TYPE?..................................................... 2240
SEARch:RESult:USBPd:FRAMe<m>:FLD<n>:VAL?........................................................ 2240
SEARch:RESult:USBPd:FRAMe<m>:INFO?...................................................................2241
Protocols