R&S RTO6 - Page 2241

Remote control commands
R&S
®
RTO6
2241User Manual 1801.6687.02 ─ 05
SEARch:RESult:USBPd:FRAMe<m>:INFO? <SearchName>
Returns specific frame information details of the selected frame in the search result.
This information is also shown in the
"Info" column of the decode results table.
Suffix:
<m>
.
*
Query parameters:
<SearchName>
Return values:
<Info>
Usage: Query only
SEARch:RESult:USBPd:FRAMe<m>:STARt? <SearchName>
Returns the start time of the frame with the selected frame number within the search
result.
Suffix:
<m>
.
*
Query parameters:
<SearchName>
Return values:
<Start> Range: -100E+24 to 100E+24
Increment: 100E-12
Default unit: s
Usage: Query only
SEARch:RESult:USBPd:FRAMe<m>:STATe? <SearchName>
Returns the status of the frame with the selected frame number within the search
result.
Suffix:
<m>
.
*
Query parameters:
<SearchName>
Return values:
<State> OK | UNKNown | INComplete | PREamble | SOP | CRC |
LENGth | FBFB
SOP
Start of packet warning
CRC
Cyclic redundancy check error
FBFB
4b5b error
Protocols