R&S RTO6 - 6.3.1 Basic trigger settings

Triggers
R&S
®
RTO6
194User Manual 1801.6687.02 ─ 05
The settings in the tab are:
● Basic trigger settings.............................................................................................
194
● Edge
......................................................................................................................196
● Glitch.....................................................................................................................197
● Width.....................................................................................................................198
● Runt.......................................................................................................................199
● Window................................................................................................................. 201
● Timeout................................................................................................................. 203
● Interval.................................................................................................................. 204
● Slew rate............................................................................................................... 205
● Setup & Hold.........................................................................................................207
● State......................................................................................................................209
● Pattern...................................................................................................................210
● Serial pattern.........................................................................................................213
● TV/Video trigger.................................................................................................... 215
● NFC trigger............................................................................................................219
● CDR trigger........................................................................................................... 219
● Triggering on serial buses.....................................................................................219
● Triggering on parallel buses and digital channels.................................................220
6.3.1 Basic trigger settings
Access: "Menu" > "Trigger" > "Setup" tab
The basic trigger settings are the trigger source and the trigger type, including the trig-
ger level. These settings are specific for each condition in a trigger sequence. To set
the trigger level automatically, use "Find level".
Depending on the trigger type, additional settings are available. They are explained in
the trigger-type specific sections.
Trigger on
Selects, if you want to trigger on a single event, or on a series of events.
Remote command:
TRIGger<m>:
EVENt[:
EVENt] on page 1427
Trigger types