R&S RTO6 - 13.6.2.5 Custom: Manchester; NRZ display settings

Protocol analysis
R&S
®
RTO6
565User Manual 1801.6687.02 ─ 05
●
"Field Name", in string format.
●
"Bit count" specifies the length of bits, in numerical format.
●
"Condition"
(optional) identifies the bit pattern to match, in string format.
●
"Format " allows the following choices:
– "Decimal"
– "Hex"
– "Octal"
– "Binary"
●
"Bit order" allows two alternatives:
– "MSB First" (most significant bit first)
– "LSB First" (least significant bit first)
●
"Color" allows you to set a user defined ARGB hexadecimal color value.
●
The "Result Column" has four options:
– "-" (none, which is the default)
– "1"
– "2"
– "3"
13.6.2.5 Custom: Manchester / NRZ display settings
Access: [Bus] > "Display" tab.
For common display settings, see Chapter 13.1.3, "Display", on page 487
.
To enhance the decode possibilities of the custom serial protocol, you can use an addi-
tional setting in the "Display" tab: "Decode layer".
Apply Filter
Enables filtering on a custom serial bus. For details see: Chapter 13.6.4, "Custom fil-
ter", on page 572.
Custom: Manchester / NRZ (option R&S
RT
O6-K510)