Acquisition and waveform setup
R&S
®
RTO6
155User Manual 1801.6687.02 ─ 05
Remote command:
PROBe<m>:
SETup:ZAXV
on page 1352
5.6.4.3 R&S RT‑ZPR power rail probes
Figure 5-10: Probe setup for power rail probe R&S
RT
‑
ZPR
The offset is the channel offset. See "Of
fset"
on page 139.
If the ProbeMeter is active, an additional function is provided in the "ProbeMeter" result
box:
Figure 5-11: ProbeMeter result box for
Specific settings for R&S RT
‑ZPR probes are the following:
Probes
To Next Page
Loading...
