Getting started
R&S
®
RTO6
39User Manual 1801.6687.02 ─ 05
[Scale]
Sets the vertical scale in V
olts per division. The vertical scale defines the displayed
amplitude of the selected waveform.
The knob lights up in the color of the selected waveform. T
urn clockwise to stretch the
waveform. Doing so, the scale value V/div decreases. Press the knob to toggle
between coarse and fine scale adjustment. For analog waveforms, the scale value is
shown in the signal icon.
To get the maximum resolution of the waveform amplitude, make sure that the wave-
forms cover most of the diagram's height.
Remote command:
CHANnel<m>:SCALe on page 1338
3.2.3.5 Analysis keys
The keys in the Analysis functional block provide direct access to measurement and
analyzing functions.
The rotary knob provides an alternative way to navigate in dialog boxes and to enter
numeric data.
[Multiuse]
The multiuse knob has various functions. It lights up when a function is active on the
knob.
●
In numeric entry fields: turn to increase or decrease the value.
●
To set cursor positions, histogram areas, and mask points in input boxes: press to
toggle the parameter
, turn clockwise to increase the value or turn counterclockwise
to decrease it.
●
To move zoom area, cursor line, or gate in diagrams: Turn to move the element
that has the focus, and press to toggle the focus.
●
In tables: press to activate the edit mode, turn clockwise to increase the value or
turn counterclockwise to decrease it, and press to enter the value and move to the
next cell.
●
To change the intensity: Press the [Intensity] key and turn the knob.
[Intensity]
Adjusts the intensity of the waveforms on the screen, or the background transparency
of dialog boxes, or the transparency of result boxes.
Instrument tour
To Next Page
Loading...
