Remote control commands
R&S
®
RTO6
2097User Manual 1801.6687.02 ─ 05
Suffix:
<m>
.
1..3
Parameters:
<ErrorPreamble> ON | OFF
*RST: ON
TRIGger<m>:HBTO:ERRor:CRC <ErrorCRC>
Enables / disables trigger on Cyclic Redundancy Check (CRC) error.
Suffix:
<m>
.
1..3
Parameters:
<ErrorCRC>
ON | OFF
*RST: ON
TRIGger<m>:HBTO:ERRor:SFD <ErrorSFD>
Enables / disables trigger on start frame delimiter (SFD) error.
Suffix:
<m>
.
1..3
Parameters:
<ErrorSFD>
ON | OFF
*RST: ON
24.17.19.3 Decode results
To show the results on the screen, use the following commands:
●
BUS<m>:
RESult on page 1671
In all BUS<m>:HBTO:RESult:FRAMe<n>:WORD<o> commands, the suffix <m>
selects the serial bus, suffix <n> selects the frame in the decode table and suffix <o>
selects the word in the selected frame.
BUS<m>:HBTO:RESult:FCOunt?.................................................................................. 2098
BUS<m>:HBTO:RESult:FRAMe<n>:FTYPe?..................................................................2098
BUS<m>:HBTO:RESult:FRAMe<n>:STATe?...................................................................2098
BUS<m>:HBTO:RESult:FRAMe<n>:STARt?...................................................................2099
BUS<m>:HBTO:RESult:FRAMe<n>:STOP?................................................................... 2099
BUS<m>:HBTO:RESult:FRAMe<n>:DESTaddress?........................................................ 2100
BUS<m>:HBTO:RESult:FRAMe<n>:SRCaddress?..........................................................2100
BUS<m>:HBTO:RESult:FRAMe<n>:TYPE?....................................................................2100
BUS<m>:HBTO:RESult:FRAMe<n>:DATA?....................................................................2100
BUS<m>:HBTO:RESult:FRAMe<n>:CRC?.....................................................................2101
BUS<m>:HBTO:RESult:FRAMe<n>:NUMWords?........................................................... 2101
BUS<m>:HBTO:RESult:FRAMe<n>:DSYMbol?.............................................................. 2101
BUS<m>:HBTO:RESult:FRAMe<n>:SSYMbol?...............................................................2101
Protocols
To Next Page
Loading...
