R&S RTO6 - 24.18 Mixed signal option (MSO, R&S RTO6-B1); 24.18.1 Digital channels

Remote control commands
R&S
®
RTO6
2420User Manual 1801.6687.02 ─ 05
Parameters:
<ZoomCoupling> ON | OFF
*RST: OFF
Usage: Asynchronous command
EYE<m>:ZDIagram <ZoomDiagram>
Selects the zoom to which the eye mask area is set if EYE<m>:ZCOupling is enabled.
Suffix:
<m>
.
1..4
Parameters:
<ZoomDiagram> String with the name of the diagram on which the zoom is based
Usage: Asynchronous command
24.18 Mixed signal option (MSO, R&S RT
O6-B1)
This chaptes decribes the remote commands of MSO option R&S
RTO6-B1.
Some of the commands in the following chapter are asynchronous. An overlapping or
asynchronous command does not automatically finish executing before the next com-
mand starts executing. If overlapping commands must be executed in a defined order,
e.g. to avoid wrong measurement results, they must be serviced sequentially.
To prevent an overlapping execution of commands, one of the commands *OPC,
*OPC? or *WAI can be used after the command or a command set.
For more information, see:
●
www.rohde-schwarz.com/rc-via-scpi, chapter "Command Sequence and Synchro-
nization"
●
Chapter 24.3, "Programming examples", on page 1259
● Digital channels...................................................................................................2420
● Parallel bus configuration....................................................................................2423
● Digital resolution..................................................................................................2430
● Trigger settings for digital signals and parallel buses......................................... 2431
● MSO data............................................................................................................2440
24.18.1 Digital channels
All DIGital: commands affect only the settings of the first MSO bus (Bus1). The set-
tings of all other parallel buses (Bus 2, 3,4) remain unchanged.
DIGital<m>:DISPlay..................................................................................................... 2421
DIGital<m>:TECHnology...............................................................................................2421
DIGital<m>:THReshold.................................................................................................2421
DIGital<m>:THCoupling................................................................................................2422
Mixed signal option (MSO, R&S R
T
O6-B1)