Remote control commands
R&S
®
RTO6
1546User Manual 1801.6687.02 ─ 05
MEASurement<m>:TRACk:DATA:STYPe?
Returns the data type: TRK (track).
Suffix:
<m>
.
1..10
See "Selection of the measurement group: MEASurement<m>"
on page
1479.
Usage: Query only
MEASurement<m>:TRACk:DATA[:VALues]?
Returns the data of track points for transmission from the instrument to the controlling
computer. The data can be used in MA
TLAB, for example.
To set the export format, use FORMat[:DATA].
Suffix:
<m>
.
1..10
See "Selection of the measurement group: MEASurement<m>"
on page 1479.
Usage: Query only
24.12.13 Gating
MEASurement<m>:GATE[:ST
ATe]................................................................................. 1546
MEASurement<m>:GATE:MODE...................................................................................1547
MEASurement<m>:GATE:ABSolute:STARt.....................................................................1547
MEASurement<m>:GATE:ABSolute:STOP..................................................................... 1547
MEASurement<m>:GATE:RELative:STARt.....................................................................1547
MEASurement<m>:GATE:RELative:STOP......................................................................1547
MEASurement<m>:GATE:CURSor................................................................................ 1548
MEASurement<m>:GATE:CCOupling............................................................................ 1548
MEASurement<m>:GATE:ZCOupling.............................................................................1548
MEASurement<m>:GATE:ZDIagram..............................................................................1549
MEASurement<m>:GATE:GCOupling............................................................................ 1549
MEASurement<m>:GATE[:STATe] <State>
Considers the gating settings of the source waveform for the measurement.
Suffix:
<m>
.
1..10
See "Selection of the measurement group: MEASurement<m>"
on page
1479.
Parameters:
<State> ON |
OFF
*RST: OFF
Automatic measurements
To Next Page
Loading...
