Remote control commands
R&S
®
RTO6
2045User Manual 1801.6687.02 ─ 05
TRIGger<m>:MDIO:DATA <Data>
Defines the 16-bit payload data pattern (both in Clause 22 or Clause 45) or the
address pattern (in Clause 45, only) to trigger for; available only in trigger type
"Data"
.
Parameters:
<Data>
24.17.17.3 Decode results
In all BUS<m>:MDIO:
WORD<n> commands, the suffix <m> selects the serial bus and
the suffix <n> selects the word number in the decode table.
BUS<m>:MDIO:WCOunt?.............................................................................................2045
BUS<m>:MDIO:WORD<n>:DATA?................................................................................ 2045
BUS<m>:MDIO:WORD<n>:PHYS?............................................................................... 2046
BUS<m>:MDIO:WORD<n>:REGI?................................................................................ 2046
BUS<m>:MDIO:WORD<n>:ST?.................................................................................... 2046
BUS<m>:MDIO:WORD<n>:STARt?............................................................................... 2047
BUS<m>:MDIO:WORD<n>:STATe?...............................................................................2047
BUS<m>:MDIO:WORD<n>:STOP?................................................................................2048
BUS<m>:MDIO:WORD<n>:SYMBol?.............................................................................2048
BUS<m>:MDIO:WORD<n>:TYPE?................................................................................2048
BUS<m>:MDIO:WCOunt?
Returns the word count for the selected serial bus, i.e. the number of words in the
present acquisition.
Suffix:
<m>
.
1..4
Return values:
<FrameCount> Range: 0 to 100000
Increment: 1
*RST: 0
Usage: Query only
BUS<m>:MDIO:WORD<n>:DATA?
Returns the 16-bit payload data field content (in Clause 22 or Clause 45), or the 16-bit
address field content (in Clause 45, only) in the present acquisition of the selected
word and the selected serial bus. The most significant bit (MSB) is transmitted first.
Suffix:
<m>
.
1..4
<n> *
Return values:
<Data>
Protocols
To Next Page
Loading...
