Power analysis (option R&S RTO6-K31)
R&S
®
RT
O6
1167User Manual 1801.6687.02 ─ 05
6. Select the correct channels of the "Current Source" and the "Voltage Source".
7. Select the "Settings" tab.
8.
Select the state of the "Enable mask test".
9. Select the "Scale".
10. Define the SOA Points.
11. Tap "Execute".
On the screen you can see the measurement waveforms of the Additionally, the
result box with numeric measurement results is shown. For details, seeChap-
ter 19.5.1.1, "Safe operating area results", on page 1165.
19.5.1.3 Safe operating area settings
In the "Channels" tab, you set the current source and the voltage source, see also:
Chapter 19.2.1, "Channels tab", on page 1134.
In the "Settings" tab, you configure the safe operating area parameters and display set-
tings.
Power path
To Next Page
Loading...
