Protocol analysis
R&S
®
RTO6
912User Manual 1801.6687.02 ─ 05
Column Description
Numeric Hexadecimal value of the field
Formatted Formatted content of the field
Tools
Press "Display settings" in the "Decode Results"
table to access the "Display" tab.
Remote commands
Remote commands are described in Chapter 24.17.25.3, "Decode results M-PHY",
on page
2292.
13.24.5
Search on decoded M-PHY data
Using the search functionality, you can find various events in the decoded data. You
can find the same events that you can trigger on, and even many more, since several
event types can also be combined.
Before you can start the search, you have to configure the bus correctly and acquire
decoded data.
To search on decoded data, set the search source to "SerBus" for the configured proto-
col.
For general information on how to handle the search functionality, see Chapter 11,
"Search functions", on page 419.
13.24.5.1 M-PHY search setup
Access: [Bus] > "Shortcuts" tab > "Setup search"
Type
Selects the search type for the selected protocol.
M-PHY and USB SSIC (option R&S RT
O6-K580 and K570)
To Next Page
Loading...
