Remote control commands
R&S
®
RTO6
2402User Manual 1801.6687.02 ─ 05
Return values:
<Stop> Range: -100E+24 to 100E+24
Increment: 100E-12
*RST: 0
Default unit: s
Usage: Query only
SEARch:RESult:DDR:FRAMe<m>:TYPE? <SearchName>
Returns the frame type for the selected frame number within the search result.
Suffix:
<m>
.
*
Query parameters:
<SearchName>
Usage: Query only
24.17.28.5 Eye diagram analysis
The suffix EYE<m> selects the eye diagram to which the command applies. You can
configure and analyze up to four eye diagrams in parallel.
There are two ways to generate eye diagrams on the R&S
RTO6:
●
Standard eye diagrams, which are a superposition of repetitively sampled digital
data.
●
Advanced eye diagrams, which are generated by superimposing waveform slices
from a multi-bit acquisition. To use advanced eye diagrams, option R&S RTO6-K91
is required.
Basic setup
EYE<m>[:STATe]......................................................................................................... 2403
EYE<m>:SOURce........................................................................................................2403
EYE<m>:HORizontal[:UNIT]..........................................................................................2403
EYE<m>:HORizontal:ABSolute:RANGe......................................................................... 2403
EYE<m>:HORizontal:ABSolute:POSition........................................................................2404
EYE<m>:HORizontal:UINTerval:RANGe.........................................................................2404
EYE<m>:HORizontal:UINTerval:POSition.......................................................................2404
EYE<m>:TIMReference:CLOCk:EDGE.......................................................................... 2405
EYE<m>:TIMReference:CLOCk:FACTor.........................................................................2405
EYE<m>:TIMReference:CLOCk:FREQuency..................................................................2405
EYE<m>:TIMReference:CLOCk:FREStimation............................................................... 2406
EYE<m>:TIMReference:CLOCk:LEVel...........................................................................2406
EYE<m>:TIMReference:CLOCk:OFEStimation............................................................... 2406
EYE<m>:TIMReference:CLOCk:OFFSet........................................................................ 2406
EYE<m>:TIMReference:CLOCk:SAMTime..................................................................... 2407
EYE<m>:TIMReference:CLOCk:SOURce.......................................................................2407
Protocols
To Next Page
Loading...
