R&S RTO6 - 24.17.20 Ethernet 1000 BASE-T1 (option R&S RTO6-K560); 24.17.20.1 Configuration

Remote control commands
R&S
®
RTO6
2116User Manual 1801.6687.02 ─ 05
SEARch:RESult:HBTO:FRAMe<m>:WORD<n>:VALue? <SearchName>
Returns the data value of the selected word within the search result.
Suffix:
<m>
.
*
<n> *
Query parameters:
<SearchName>
Return values:
<WordValue> Range: 0 to 65535
Increment: 1
*RST: 0
Usage: Query only
24.17.20 Ethernet 1000BASE-T1 (option R&S RTO6-K560)
● Configuration.......................................................................................................21
16
● Decode results.................................................................................................... 2119
● Trigger.................................................................................................................2125
● Search settings................................................................................................... 2133
● Search results..................................................................................................... 2141
24.17.20.1 Configuration
In all BUS<m>:TBTO commands, the suffix <m> selects the serial bus.
BUS<m>:TBTO:ATTN <Attenuation>
Sets the attenuation factor. It is used to de-amplify the reverse signal before subtract-
ing it from the forward signal.
Suffix:
<m>
.
1..4
Parameters:
<Attenuation> Range: -100 to 0
Increment: 0.1
*RST: -26
Default unit: dB
BUS<m>:TBTO:FDAM <SourceDAminus>
Selects the DA- source of the provided forward single ended signal, if BUS<m>:TBTO:
FTYP is set to SINGle.
Suffix:
<m>
.
1..4
Protocols