Remote control commands
R&S
®
RTO6
2119User Manual 1801.6687.02 ─ 05
Parameters:
<Polarity> NORMal | INVert
*RST: NORMal
BUS<m>:TBTO:SYMRate <SymbolRate>
Defines the rate of ternary symbols.
Suffix:
<m>
.
1..4
Parameters:
<SymbolRate> Range: 10 to 1500
Increment: 1E-3
*RST: 750
Default unit: MSymb/s
24.17.20.2 Decode results
To show the results on the screen, use the following commands:
●
BUS<m>:
RESult on page 1671
BUS<m>:TBTO:RESult:FCOunt?...................................................................................2119
BUS<m>:TBTO:RESult:FRAMe<n>:BITRate?.................................................................2120
BUS<m>:TBTO:RESult:FRAMe<n>:CRC?..................................................................... 2120
BUS<m>:TBTO:RESult:FRAMe<n>:DATA?.................................................................... 2120
BUS<m>:TBTO:RESult:FRAMe<n>:DESTaddress?.........................................................2121
BUS<m>:TBTO:RESult:FRAMe<n>:DSYMbol?...............................................................2121
BUS<m>:TBTO:RESult:FRAMe<n>:FTYPe?.................................................................. 2121
BUS<m>:TBTO:RESult:FRAMe<n>:NUMWords?............................................................2122
BUS<m>:TBTO:RESult:FRAMe<n>:SRCaddress?.......................................................... 2122
BUS<m>:TBTO:RESult:FRAMe<n>:SSYMbol?...............................................................2122
BUS<m>:TBTO:RESult:FRAMe<n>:STARt?................................................................... 2123
BUS<m>:TBTO:RESult:FRAMe<n>:STATe?................................................................... 2123
BUS<m>:TBTO:RESult:FRAMe<n>:STOP?....................................................................2124
BUS<m>:TBTO:RESult:FRAMe<n>:TYPE?....................................................................2124
BUS<m>:TBTO:RESult:FRAMe<n>:WORD<o>:TYPE?................................................... 2124
BUS<m>:TBTO:RESult:FRAMe<n>:WORD<o>:VALue?.................................................. 2125
BUS<m>:TBTO:RESult:FCOunt?
Returns the number of decoded frames.
Suffix:
<m>
.
1..4
Selects the serial bus.
Return values:
<FrameCount> Range: 0 to 100000
Increment: 1
*RST: 0
Protocols
To Next Page
Loading...
