R&S RTO6 - 13.10.4.1 SENT label list translation example

Protocol analysis
R&S
®
RTO6
651User Manual 1801.6687.02 ─ 05
For an example to label list translation, see Chapter 13.10.4.1, "SENT label list transla-
tion example", on page 651
.
Remote command:
●
BUS<m>:SENT:
FRAMe<n>:SYMBol? on page 1914
●
BUS<m>:SENT:FRAMe<n>:SDATa? on page 1914
●
BUS<m>:SENT:FRAMe<n>:SDEXport? on page 1914
13.10.4.1 SENT label list translation example
The example shows the xml sequence for a label list translation in the SENT protocol:
<?xml version="1.0" encoding="UTF-8"?>
<sb:LABEL-LIST-FILE>
<sb:PROJECT ID="SENT-TRANSLATION SYSTEM">
<sb:SHORT-NAME>SENT</sb:SHORT-NAME>
<sb:LONG-NAME>SENT-Translation System Demo</sb:LONG-NAME>
<sb:DESCRIPTION>This is the database for Translation demo for SENT.</sb:DESCRIPTION>
</sb:PROJECT>
<sb:FRAMES>
<sb:FRAME NAME="Air Temperature" STATE="ON">
<sb:DESCRIPTION></sb:DESCRIPTION>
<sb:ID-VALUE>0</sb:ID-VALUE>
<sb:ID-LENGTH>4</sb:ID-LENGTH>
<sb:DATA-SIZE>16</sb:DATA-SIZE>
</sb:FRAME>
<sb:FRAME NAME="Humidity" STATE="OFF">
<sb:DESCRIPTION></sb:DESCRIPTION>
<sb:ID-VALUE>2</sb:ID-VALUE>
<sb:ID-LENGTH>4</sb:ID-LENGTH>
<sb:DATA-SIZE>16</sb:DATA-SIZE>
</sb:FRAME>
<sb:FRAME NAME="Barometric Pressure" STATE="OFF">
<sb:DESCRIPTION></sb:DESCRIPTION>
<sb:ID-VALUE>4</sb:ID-VALUE>
<sb:ID-LENGTH>4</sb:ID-LENGTH>
<sb:DATA-SIZE>16</sb:DATA-SIZE>
</sb:FRAME>
<sb:FRAME NAME="Configuration Code" STATE="OFF">
<sb:DESCRIPTION></sb:DESCRIPTION>
<sb:ID-VALUE>04</sb:ID-VALUE>
<sb:ID-LENGTH>8</sb:ID-LENGTH>
<sb:DATA-SIZE>12</sb:DATA-SIZE>
</sb:FRAME>
<sb:FRAME NAME="Manufacturer Code" STATE="OFF">
<sb:DESCRIPTION></sb:DESCRIPTION>
<sb:ID-VALUE>05</sb:ID-VALUE>
<sb:ID-LENGTH>8</sb:ID-LENGTH>
<sb:DATA-SIZE>12</sb:DATA-SIZE>
SENT (option R&S R
T
O6-K520)