Protocol analysis
R&S
®
RTO6
937User Manual 1801.6687.02 ─ 05
13.26.2 PCIe configuration
13.26.2.1 PCIe configuration settings
Access: [Bus] >
"PCIe"
> "Setup" tab
Make sure that the tab of the correct serial bus is selected.
See also: Chapter 13.1.1, "Setup - general settings", on page 485
Generation
Selects the generation of the PCIe technology.
"PCIe Gen1
(2.5 Gbit/s) "
Selects the PCIe generation 1.0, standard introduced in 2003. It has
a transfer rate of 2.5 Gbit/s.
"PCIe Gen2 (5
Gbit/s) "
Selects the PCIe generation 2.0, standard introduced in 2007. It has
a transfer rate of 5 Gbit/s.
Remote command:
BUS<m>:PCIE:GEN
on page 2347
PCIe (option R&S RT
O6-K72)
To Next Page
Loading...
