R&S RTO6 - 24.19.1.5 ARB

Remote control commands
R&S
®
RTO6
2452User Manual 1801.6687.02 ─ 05
WGENerator<m>:SWEep:FSTart <StartFrequency>
Sets the start frequency of the sweep range.
Suffix:
<m>
.
1..2
Parameters:
<StartFrequency> Range: 1E-3 to 100E+6
Increment: 1
*RST: 1000
Default unit: Hz
WGENerator<m>:SWEep:TIME <Time>
Sets the duration of the sweep.
Suffix:
<m>
.
1..2
Parameters:
<T
ime> Range: 1E-3 to 500
Increment: 1
*RST: 1E-3
Default unit: s
WGENerator<m>:SWEep[:FEND] <StopFrequency>
Sets the stop frequency of the sweep range.
Suffix:
<m>
.
1..2
Parameters:
<StopFrequency> Range: 1E-3 to 100E+6
Increment: 1
*RST: 1E+6
Default unit: Hz
24.19.1.5 ARB
WGENerator<m>:ARBGen:COPY................................................................................. 2453
WGENerator<m>:ARBGen:MUL
Tichannel:IMPort............................................................2453
WGENerator<m>:ARBGen:MULTichannel:NAME............................................................2453
WGENerator<m>:ARBGen:MULTichannel:OPEN............................................................2453
WGENerator<m>:ARBGen:NAME................................................................................. 2454
WGENerator<m>:ARBGen:OPEN................................................................................. 2454
WGENerator<m>:ARBGen:RUNMode............................................................................2454
WGENerator<m>:ARBGen:SAMPles?............................................................................2454
WGENerator<m>:ARBGen:SELect................................................................................ 2455
Waveform generator (option R&S R
T
O6-B6)