R&S RTO6 - Page 2453

Remote control commands
R&S
®
RTO6
2453User Manual 1801.6687.02 ─ 05
WGENerator<m>:ARBGen:SRATe.................................................................................
2455
WGENerator<m>:ARBGen[:SOURce]
............................................................................ 2455
WGENerator<m>:ARBGen:RUNSingle...........................................................................2456
WGENerator<m>:ARBGen:COPY
Loads the waveform from the selected signal source (WGENerator<m>:ARBGen:
SELect).
Suffix:
<m>
.
1..2
Usage: Event
WGENerator<m>:ARBGen:MULTichannel:IMPort <SavedWfmSrc>
Assigns a waveform from the multichannel file to the arbitrary waveform generator
.
Suffix:
<m>
.
1..2
Parameters:
<SavedWfmSrc>
WFM1 | WFM2 | WFM3 | WFM4
*RST: WFM1
Example:
WGENerator1:ARBGen:MULTichannel:NAME
ArbMultichannelCurve_2017-02-16_01.bin
WGENerator1:
ARBGen:
MULTichannel:IMPort WF1
WGENerator1:ARBGen:MULTichannel:OPEN
WGENerator<m>:ARBGen:MULTichannel:NAME <FilePath>
Defines the path and the multichannel arbitrary waveform file to be imported. If not
path is given, the default path
C:\Users\
Public\
Public Documents\Rohde-Schwarz\RTx\RefWaveforms
is used.
Suffix:
<m>
.
1..2
Parameters:
<FilePath>
Example: See WGENerator<m>:
ARBGen:
MULTichannel:IMPort
on page 2453.
WGENerator<m>:ARBGen:MULTichannel:OPEN
Loads the arbitrary waveform.
Suffix:
<m>
.
1..2
Waveform generator (option R&S RT
O6-B6)