R&S RTO6 - 24.17.10.2 Trigger

Remote control commands
R&S
®
RTO6
1870User Manual 1801.6687.02 ─ 05
Suffix:
<m>
.
1..4
Selects the serial bus.
Parameters:
<SeparateHdrBts> ON | OFF
*RST: OFF
24.17.10.2 Trigger
The trigger suf
fix <m> is always 1 and can be omitted. It selects the trigger event: Only
the A-trigger is available for triggering on serial buses.
To trigger on a serial bus, make sure that:
●
TRIGger<m>:SOURce[:SELect] is set to SBUS.
●
The sources of the serial bus are channel signals: use BUS<m>:...:SOURce
commands.
●
Decoding is enabled: BUS<m>[:STATe] is set to ON.
TRIGger<m>:FLXRay:TYPE......................................................................................... 1871
TRIGger<m>:FLXRay:PLPReamble...............................................................................1872
TRIGger<m>:FLXRay:NUFRame...................................................................................1872
TRIGger<m>:FLXRay:SYFRame...................................................................................1872
TRIGger<m>:FLXRay:STFRame................................................................................... 1872
TRIGger<m>:FLXRay:FCONdition.................................................................................1872
TRIGger<m>:FLXRay:FMIN..........................................................................................1873
TRIGger<m>:FLXRay:FMAX.........................................................................................1873
TRIGger<m>:FLXRay:PCONdition.................................................................................1873
TRIGger<m>:FLXRay:PMIN..........................................................................................1874
TRIGger<m>:FLXRay:PMAX.........................................................................................1874
TRIGger<m>:FLXRay:CENable.....................................................................................1874
TRIGger<m>:FLXRay:CMIN..........................................................................................1874
TRIGger<m>:FLXRay:CMAX........................................................................................ 1875
TRIGger<m>:FLXRay:CSTep........................................................................................ 1875
TRIGger<m>:FLXRay:DPOPerator................................................................................ 1875
TRIGger<m>:FLXRay:DPOSition...................................................................................1875
TRIGger<m>:FLXRay:DPTO.........................................................................................1876
TRIGger<m>:FLXRay:DCONdition.................................................................................1876
TRIGger<m>:FLXRay:DMIN..........................................................................................1876
TRIGger<m>:FLXRay:DMAX........................................................................................ 1876
TRIGger<m>:FLXRay:SYMBol...................................................................................... 1877
TRIGger<m>:FLXRay:BSSerror.....................................................................................1877
TRIGger<m>:FLXRay:FESerror.....................................................................................1877
TRIGger<m>:FLXRay:FSSerror.....................................................................................1877
TRIGger<m>:FLXRay:HCRCerror..................................................................................1878
TRIGger<m>:FLXRay:PCRCerror..................................................................................1878
Protocols