R&S RTO6 - 24.26.2 STATus:QUEStionable registers

Remote control commands
R&S
®
RTO6
2573User Manual 1801.6687.02 ─ 05
●
3= WTRIgger (wait for trigger)
●
4= MEASuring
Usage: Query only
STATus:OPERation:ENABle <Enable>
Controls the ENABle part of the ST
A
Tus:OPERation register. The ENABle defines
which events in the EVENt part of the status register are forwarded to the OPERation
summary bit (bit 7) of the status byte. The status byte can be used to create a service
request.
Parameters:
<Enable> Range: 1 to 65535
Increment: 1
Example:
STATus:OPERation:ENABle 5
The ALIGnment event (bit 0) and AUT
oset event (bit 2) are for-
warded to the OPERation summary bit of the status byte.
24.26.2 STA
Tus:QUEStionable registers
The commands of the STATus:QUEStionable subsystem control the status reporting
structures of the STATus:QUEStionable registers.
See also: "STATus:QUEStionable register" on page 1247
Status reporting