R&S RTO6 - Page 2236

Remote control commands
R&S
®
RTO6
2236User Manual 1801.6687.02 ─ 05
EQUal | NEQual | LTHan | LETHan | GTHan | GETHan
Equal, Not equal, Less than, Less than or equal, Greater than,
Greater than or equal. These conditions require one endpoint
value to be set using SEARch:TRIGger:
USBPd:
FRAMe<m>:
FLD<n>:DMIN.
INRange | OORange
In range, out of range. These conditions require a range of end-
point values to be set using SEARch:TRIGger:USBPd:
FRAMe<m>:FLD<n>:DMIN and SEARch:TRIGger:USBPd:
FRAMe<m>:FLD<n>:DMAX.
*RST: EQUal
Parameters for setting and query:
<SearchName> String with the name of the search.
SEARch:TRIGger:USBPd:IMAX <SearchName>,<Frame>, <Field>, <Data>
SEARch:TRIGger:USBPd:FRAMe<m>:FLD<n>:
IMAX <SearchName>,<IndexMax>
SEARch:TRIGger:USBPd:FRAMe<m>:FLD<n>:IMAX? <SearchName>
Sets the end value of an index range if SEARch:TRIGger:USBPd:FRAMe<m>:
FLD<n>:IOPerator is set to INRange or RANGe.
Suffix:
<m>
.
*
Specifies the frame.
<n> *
Specifies the field number within the frame.
Parameters:
<IndexMax> Specifies the end value for the index range within the field.
The index range, increment and *RST values depend on the
field type.
Parameters for setting and query:
<SearchName> String with the name of the search.
SEARch:TRIGger:USBPd:IMIN <SearchName>,<Frame>, <Field>, <Data>
SEARch:TRIGger:USBPd:FRAMe<m>:FLD<n>:
IMIN <SearchName>,<IndexMin>
SEARch:TRIGger:USBPd:FRAMe<m>:FLD<n>:IMIN? <SearchName>
Specifies the index at which the data is to be searched, or sets the start value of an
index range in which the data is to be searched.
Suffix:
<m>
.
*
Specifies the frame.
<n> *
Specifies the field number within the frame.
Protocols