R&S RTO6 - Page 1995

Remote control commands
R&S
®
RTO6
1995User Manual 1801.6687.02 ─ 05
Parameters for setting and query:
<SearchName>
SEARch:TRIGger:ARINc:SDI <SearchName>,<SDI>
SEARch:TRIGger:ARINc:
SDI? <SearchName>
Sets the source/destination identifier (SDI) bits.
Parameters:
<SDI>
Parameters for setting and query:
<SearchName>
SEARch:TRIGger:ARINc:SSM <SearchName>,<SSM>
SEARch:TRIGger:ARINc:SSM? <SearchName>
Sets the sign/status matrix (SSM) bits.
Parameters:
<SSM>
Parameters for setting and query:
<SearchName>
SEARch:TRIGger:ARINc:ERRor:CODing <SearchName>,<CodingError>
SEARch:TRIGger:ARINc:
ERRor:CODing? <SearchName>
Enables the search for coding errors.
Parameters:
<CodingError>
ON | OFF
*RST: ON
Parameters for setting and query:
<SearchName>
SEARch:TRIGger:ARINc:ERRor:PARity <SearchName>,<ParityError>
SEARch:TRIGger:ARINc:ERRor:P
ARity? <SearchName>
Enables the search for parity errors.
Parameters:
<ParityError> ON | OFF
*RST: ON
Parameters for setting and query:
<SearchName>
Protocols