R&S RTO6 - Page 1719

Remote control commands
R&S
®
RTO6
1719User Manual 1801.6687.02 ─ 05
<n> *
Selects the frame.
<o> *
Selects the word number.
Return values:
<Stop> Range:
-100E+24 to 100E+24
*RST: 0
Default unit: s
Usage: Query only
BUS<m>:SPI:FRAMe<n>:WORD<o>:MISO?
Returns the data value of the specified word on the MISO line.
Suffix:
<m>
.
1..4
Selects the serial bus.
<n> *
Selects the frame.
<o> *
Selects the word number
.
Return values:
<MISOV
alue> To set the value format, use FORMat:BPATtern
.
The values below – range, increment and reset – are decimal
values.
Range: 0 to 4294967295
*RST: 0
Usage: Query only
BUS<m>:SPI:FRAMe<n>:WORD<o>:FMISo?
Returns the formatted value of the specified word on the MISO line.
Suffix:
<m>
.
1..4
Selects the serial bus.
<n> *
Selects the frame.
<o> *
Selects the word number.
Return values:
<FormattedMISOV
al>
Usage: Query only
Protocols