R&S RTO6 - Page 1667

Remote control commands
R&S
®
RTO6
1667User Manual 1801.6687.02 ─ 05
MMEMory:AUTonaming:DATE <State>
MMEMory:AUT
onaming:INDex
<State>
MMEMory:AUTonaming:TIME <State>
Includes or excludes the name part in the file name pattern for automatic file name
generation. This name is used as the default file name.
The prefix indicates the type of data that is saved, for example, Histogram, RefCurve,
Settings.
To define a user text, use MMEMory:AUTonaming:TEXT.
Parameters:
<State> ON | OFF
*RST: ON
Usage: Asynchronous command
MMEMory:AUTonaming:TEXT <NameString>
Defines a text, that can be included in the autonaming pattern.
Parameters:
<NameString> String parameter
Usage: Asynchronous command
MMEMory:AUTonaming:DEFaultpath <Path>
Sets the path where data and settings files will be stored. The factory default path is:
●
"C:\Users\Public\Documents\Rohde-Schwarz\RTx" if no USB flash drive
is connected
●
Drive letter of the USB flash drive, for example, "E:\"
or "F:\" if a USB flash
drive is connected.
Parameters:
<Path> String parameter
Usage: Asynchronous command
MMEMory:AUTonaming:RESPath
Resets the path for file operations to the factory default path.
Usage: Event
Asynchronous command
MMEMory:AUTonaming:RESall
Resets all autonaming settings to the default value, including the path.
Data management