R&S RTO6 - Page 1917

Remote control commands
R&S
®
RTO6
1917User Manual 1801.6687.02 ─ 05
SEARch:TRIGger:SENT:SDMX.....................................................................................
1922
SEARch:TRIGger:SENT
:PULSeerror..............................................................................1923
SEARch:TRIGger:SENT:PPERioderror...........................................................................1923
SEARch:TRIGger:SENT:IRFLength............................................................................... 1923
SEARch:TRIGger:SENT:FORMerror.............................................................................. 1923
SEARch:TRIGger:SENT:CRCerror.................................................................................1924
SEARch:TRIGger:SENT:CALibration <SearchName>,<CalSyncPulse>
SEARch:TRIGger:SENT:CALibration? <SearchName>
Enables the search for the Calibration/Synchronization pulse.
Parameters:
<CalSyncPulse> ON | OFF
*RST: OFF
Parameters for setting and query:
<SearchName>
SEARch:TRIGger:SENT:TRANsmission <SearchName>,<T
ransmSequence>
SEARch:TRIGger:SENT
:TRANsmission? <SearchName>
Enables the search for a transmission sequence, which is combination of status and
data conditions.
To set the transmission sequence conditions, use SEARch:TRIGger:SENT:TTYPe
and SEARch:TRIGger:SENT:STATus.
To set the data condition, use SEARch:TRIGger:SENT:TDCN, TRIGger<m>:SENT:
TDCN, SEARch:TRIGger:SENT:TDMN and SEARch:TRIGger:SENT:TDMX.
Parameters:
<TransmSequence> ON | OFF
*RST: OFF
Parameters for setting and query:
<SearchName>
SEARch:TRIGger:SENT:SMSG <SearchName>,<SerialMessage>
SEARch:TRIGger:SENT:SMSG?
<SearchName>
Enables the search in a serial message, which is combination of identifier and data
conditions.
To select the sequence condition, use SEARch:TRIGger:SENT:STYPe.
To set the identifier condition for the serial message, use SEARch:TRIGger:SENT:
SICN, SEARch:TRIGger:SENT:SIMN and SEARch:TRIGger:SENT:SIMX.
To set the data condition, use SEARch:TRIGger:SENT:SDCN, SEARch:TRIGger:
SENT:SDMN and SEARch:TRIGger:SENT:SDMX.
Protocols