R&S RTO6 - Page 1788

Remote control commands
R&S
®
RTO6
1788User Manual 1801.6687.02 ─ 05
Parameters for setting and query:
<SearchName>
SEARch:TRIGger:CMSB:FRAMe<m>:FLD<n>:IMAX <SearchName>,<IndexMax>
SEARch:TRIGger:CMSB:
FRAMe<m>:FLD<n>:IMAX? <SearchName>
SEARch:TRIGger:CMSB:
IMAX <SearchName>,<Frame>, <Field>, <Data>
Sets the end value of the bit index range (data position range), if SEARch:TRIGger:
CMSB:IOPerator is set to INRange.
Setting parameters:
<SearchName>
<Frame>
<Field>
<Data>
Usage: Setting only
SEARch:TRIGger:CMSB:FRAMe<m>:FLD<n>:IMIN <SearchName>,<IndexMin>
SEARch:TRIGger:CMSB:FRAMe<m>:FLD<n>:IMIN
? <SearchName>
SEARch:TRIGger:CMSB:IMIN <SearchName>,<Frame>, <Field>, <Data>
Sets the bit index (data position).
Setting parameters:
<SearchName>
<Frame>
<Field>
<Data>
Usage: Setting only
SEARch:TRIGger:CMSB:IOPerator <SearchName>,<Frame>, <Field>, <Operator>
SEARch:TRIGger:CMSB:FRAMe<m>:
FLD<n>:IOPerator
<SearchName>,<IndexOperator>
SEARch:TRIGger:CMSB:FRAMe<m>:
FLD<n>:IOPerator? <SearchName>
Sets the operator for the index for searching in the selected field of the selected frame.
Suffix:
<m>
.
*
<n> *
Parameters:
<IndexOperator> EQUal | INRange | RANGe
EQUal
This condition requires one endpoint value to be set using
SEARch:TRIGger:CMSB:
FRAMe<m>:FLD<n>:IMIN.
Protocols