R&S RTO6 - Page 1636

Remote control commands
R&S
®
RTO6
1636User Manual 1801.6687.02 ─ 05
SEARch:RESDiagram:HORZ:RELative:SPAN <SearchName>,<RelativeSpan>
SEARch:RESDiagram:
HORZ:RELative:SP
AN? <SearchName>
Defines the width of the zoom area.
Parameters:
<RelativeSpan> Range: 1E-15 to 100
Increment: 0.1
*RST: 1
Default unit: %
Parameters for setting and query:
<SearchName> Search definition
Usage: Asynchronous command
SEARch:RESDiagram:SHOW <SearchName>,<ShwSearchWind>
SEARch:RESDiagram:SHOW? <SearchName>
If enabled, a zoom window is displayed for the currently selected search result. The
zoom area is indicated in the diagram that displays the source waveform of the search.
Parameters:
<ShwSearchWind>
ON | OFF
*RST: OFF
Parameters for setting and query:
<SearchName> Search definition
Usage: Asynchronous command
SEARch:RESDiagram:VERT:ABSolute:POSition <SearchName>,<Position>
SEARch:RESDiagram:VERT
:ABSolute:POSition? <SearchName>
Defines the y-value of the centerpoint of the zoom area.
Parameters:
<Position> Range: -100E+24 to 100E+24
Increment: 0.01
*RST: 0.01
Parameters for setting and query:
<SearchName> Search definition
Usage: Asynchronous command
SEARch:RESDiagram:VERT:ABSolute:SPAN <SearchName>,<Span>
SEARch:RESDiagram:VERT
:ABSolute:SPAN? <SearchName>
Defines the height of the zoom area.
Search