R&S RTO6 - Page 439

Search functions
R&S
®
RTO6
439User Manual 1801.6687.02 ─ 05
The following settings configure the layout of the result table in the "Search Results"
box and the size and position of the search zoom window
. The result tables can be sor-
ted by x-position or value. Y
ou can define a maximum number of table entries.
Show result table
Displays or hides the search result table.
Remote command:
SEARch:RESult:SHOW
on page 1638
Max result count
Defines the maximum number of entries in the search result table.
Remote command:
SEARch:RESult:LIMit on page 1638
Sort by
Sorts the search results by x-value position or value of the result.
Remote command:
SEARch:RESult:SORT[:
MODE] on page 1639
Sort ascending
By default, the results are listed in descending order, i.e. the largest value at the top. To
change the sorting direction, enable "Sort ascending".
Remote command:
SEARch:RESult:SORT:ASCending on page 1638
Clear results
Clears the search results once and starts a new search.
Remote command:
SEARch:CLEar
on page 1604
Auto clear
If "Auto clear" is enabled, the instrument displays the search results of the last acquisi-
tion.
If "Auto clear" is disabled, the first result of each acquisition is listed until the maximum
number of entries in the table is reached.
Show result zoom
If enabled, a zoom window is displayed for the currently selected search result. The
zoom area is indicated in the diagram that displays the source waveform of the search.
Remote command:
SEARch:RESDiagram:SHOW on page 1636
Define result zoom
Opens a dialog to define the reult zoom display settings.
See Chapter 11.4.2, "Display zoom settings", on page 440.
Search display presentation