R&S RTO6 - Page 2326

Remote control commands
R&S
®
RTO6
2326User Manual 1801.6687.02 ─ 05
Parameters for setting and query:
<SearchName>
Example: Searches for CRC and length errors:
SEARch:TRIGger:MPHY:
SSIC:ERRor1:ENABle ON
Enables searching for CRC Error.
SEARch:TRIGger:MPHY:SSIC:ERENable "Length
Error",ON
Enables searching for Length Error.
SEARch:TRIGger:MPHY:SSIC:FRENable <SearchName>,<Frame>, <Enabler>
SEARch:TRIGger:MPHY
:SSIC:FRAMe<m>:
ENABle <SearchName>,<Enable>
SEARch:TRIGger:MPHY:SSIC:FRAMe<m>:ENABle? <SearchName>
Defines the frame type to be searched for.
Suffix:
<m>
.
*
Specifies the frame number.
Parameters:
<Enable> ON |
OFF
*RST: OFF
Parameters for setting and query:
<SearchName> String with the name of the search.
Example:
SEARch:TRIGger:MPHY:SSIC:FRAMe1:ENABle ON
Enables searching for the TSEQ frame.
SEARch:
TRIGger:MPHY:
SSIC:FRENable "TS1" ON
Enables searching for the TS1 frame.
SEARch:TRIGger:MPHY:SSIC:FIENable <SearchName>,<Frame>, <Field>,
<Enabler>
SEARch:TRIGger:MPHY:SSIC:FRAMe<m>:
FLD<n>:ENABle
<SearchName>,<CondEnabler>
SEARch:TRIGger:MPHY:SSIC:FRAMe<m>:FLD<n>:ENABle? <SearchName>
Enables or disables the checking condition for searching a specific data pattern in the
selected field of the selected frame.
Suffix:
<m>
.
*
Specifies the frame number.
<n> *
Specifies the field number within the frame.
Parameters:
<CondEnabler>
ON | OFF
ON
Checking condition enabled
Protocols