R&S RTO6 - Page 2328

Remote control commands
R&S
®
RTO6
2328User Manual 1801.6687.02 ─ 05
Suffix:
<m>
.
*
Specifies the frame number
.
<n> *
Specifies the field number within the frame.
Parameters:
<BitState> ONE |
ZERO | DC
ONE
1
ZERO
0
DC
"Don't care" (DC) = X
*RST: DC
Parameters for setting and query:
<SearchName> String with the name of the search.
SEARch:TRIGger:MPHY:SSIC:DMAX <SearchName>,<Frame>, <Field>, <Data>
SEARch:TRIGger:MPHY
:SSIC:FRAMe<m>:
FLD<n>:DMAX
<SearchName>,<DataMax>
SEARch:TRIGger:MPHY:SSIC:FRAMe<m>:FLD<n>:DMAX? <SearchName>
Sets the end value of a data pattern range if SEARch:TRIGger:MPHY:SSIC:
FRAMe<m>:FLD<n>:DOPerator is set to INRange or OORange.
Suffix:
<m>
.
*
Specifies the frame number.
<n> *
Specifies the field number within the frame.
Parameters:
<DataMax>
Specifies the name of the generic trigger setting frame.
Parameters for setting and query:
<SearchName> String with the name of the search.
SEARch:TRIGger:MPHY:SSIC:DMIN <SearchName>,<Frame>, <Field>, <Data>
SEARch:TRIGger:MPHY:SSIC:FRAMe<m>:
FLD<n>:DMIN
<SearchName>,<DataMin>
SEARch:TRIGger:MPHY:SSIC:FRAMe<m>:FLD<n>:DMIN? <SearchName>
Specifies the data pattern to be searched, or sets the start value of a data pattern
range to be searched.
Suffix:
<m>
.
*
Specifies the frame number.
Protocols