R&S RTO6 - Page 1130

Power analysis (option R&S RTO6-K31)
R&S
®
RT
O6
1130User Manual 1801.6687.02 ─ 05
POWer:REPort:TEST:COUNt on page
2526
POWer:
REPort:TEST:INSert on page 2524
POWer:REPort:TEST:LSENd? on page 2527
POWer:REPort:TEST:REMove on page 2524
Selection
Manages the selection of the result reports.
Select all ← Selection
Selects all result reports.
Remote command:
POWer:REPort:TEST:SEA on page 2525
Deselect all ← Selection
Deselects all result reports.
Remote command:
POWer:REPort:TEST:DSEA on page 2525
Invert Selection ← Selection
Inverts the selection of all result reports, meaning that all selected result reports are
deselected and vice versa.
Remote command:
POWer:REPort:TEST:ISE on page 2525
Remove selected ← Selection
Removes the selected result report.
Remote command:
POWer:REPort:TEST:RSE on page 2525
Directory
Selects the directory, from which previous report results are inserted into the report
table. You can use this directory to insert previously recorded report data into the cur-
rent report.
Remote command:
POWer:REPort:TEST:DIRectory on page 2526
Report Path
Enter the file name to load or to save the report to, and select the file format with the
format button on the right.
"Load"
Loads the most recently created report with the Windows default
viewer application for the pdf/rtf file format.
"Open"
Opens a file selection dialog box and loads the selected file.
"Save"
Saves the data to the selected file.
"Save As..."
Opens the file selection dialog box and saves the data to the selected
file.
".pdf/.rtf"
Selects the file format.
Power measurement selection