Compliance tests
R&S
®
RTO6
1219User Manual 1801.6687.02 ─ 05
– R&S R
TO/R&S RTP-K23 GBASE-T Ethernet compliance test option (required
option, installed on the R&S
RTO6)
– R&S RT-ZF2 Ethernet test fixture set
●
10GBASE-T Ethernet compliance tests:
– R&S RTO/R&S RTP oscilloscope with at least 2 GHz bandwidth
For precise power spectral density and power level measurements up to
3 GHz, it is recommended to use an oscilloscope and a differential probe with
3 GHz bandwidth each.
– Differential probe with at least 3 GHz bandwidth
– R&S RTO/R&S RTP-K23 GBASE-T Ethernet compliance test option (required
option, installed on the R&S RTO6)
– R&S RT-ZF2 Ethernet test fixture set
●
100BASE-T1 compliance tests:
– R&S RTO/R&S RTP oscilloscope with at least 600 MHz bandwidth
– Differential probe with 1 GHz bandwidth
– R&S RTO/R&S RTP-K24 100BASE-T1 compliance test option (required option,
installed on the R&S RTO6)
– R&S RT-ZF2 Ethernet test fixture set
– R&S RT-ZF3 frequency converter for transmitter distortion tests
●
1000BASE-T1 compliance tests:
– R&S RTO/R&S RTP oscilloscope with at least 2 GHz bandwidth
– Differential probe with 2 GHz bandwidth
– R&S RTO/R&S RTP-K87 1000BASE-T1 compliance test option (required
option, installed on the R&S RTO6)
– R&S RT-ZF2 Ethernet test fixture set
– R&S RT-ZF6 frequency converter for transmitter distortion tests
●
MGBASE-T1 compliance tests:
– R&S RTO / R&S RTO6 /R&S RTP oscilloscope, with a bandwidth of:
- for 2.5 GBASE-T1 tests: at least 3.5 GHz
- for 5 GBASE-T1 tests: at least 7 GHz
- for 10 GBASE-T1 tests: at least 14 GHz
– 2 BNC/SMA cables
– R&S RTO/R&S RTP-K88 MGBASE-T1 compliance test option (required option,
installed on the R&S RTO6)
●
10BASE-T1 compliance tests:
– R&S RTO/R&S RTP oscilloscope
– Optional Differential probe with 1 GHz bandwidth
– R&S RTO/R&S RTP-K89 10BASE-T1 compliance test option (required option,
installed on the R&S RTO6)
●
R&S RTO-B6/R&S RTP-B6/Tabor WX2182B/Tabor WX2182C arbitrary waveform
generator for automatic disturber tests. For some disturber tests, also HMF2550
can be used.
Ethernet compliance tests (options R&S R
T
O6-K22/K23/K24/K87/K88/K89)
To Next Page
Loading...
