R&S RTO6 - Page 1380

Remote control commands
R&S
®
RTO6
1380User Manual 1801.6687.02 ─ 05
DIFFerential<m>:STATe <State>
Activates the dif
ferential signal. T
wo differential signals are available.
Suffix:
<m>
.
1..2
Differential signal
Parameters:
<State> ON |
OFF
*RST: OFF
Usage: Asynchronous command
DIFFerential<m>:PSIGnal[:SELect] <Signal>
DIFFerential<m>:NSIGnal[:SELect] <Signal>
Select the analog input channel of the positive and negative signal.
Suffix:
<m>
.
1..2
Differential signal
Parameters:
<Signal> C1W1 | C2W1 | C3W1 |
C4W1
*RST: C1W1
Usage: Asynchronous command
DIFFerential<m>:AOUTput <Output>
DIFFerential<m>:BOUTput <Output>
Select the waveform that is the result of differential processing. 2 output waveforms per
digital signal can be defined.
Suffix:
<m>
.
1..2
Differential signal
Parameters:
<Output> P |
N | DIFF | COM
P | N
Positive or negative waveform.
DIFF
Differential waveform.
COM
Common mode waveform.
*RST
: COM
Usage: Asynchronous command
Acquisition and setup