R&S RTO6 - Page 1562

Remote control commands
R&S
®
RTO6
1562User Manual 1801.6687.02 ─ 05
Suffix:
<m>
.
V
alid suf
fix numbers: 2 to 21, 61 to 68, 108 to 118, 151 to 157,
173 to 179
Source waveform of the measurement, see Chapter 24.4.1,
"Waveform suffix", on page 1279.
Parameters:
<Value>
Usage: Asynchronous command
REFLevel<m>:ABSolute:TOTube <V
alue>
Defines an area above the high signal level which is still considered to be high level.
Suffix:
<m>
.
Valid suf
fix numbers: 2 to 21, 61 to 68, 108 to 118, 151 to 157,
173 to 179
Source waveform of the measurement, see Chapter 24.4.1,
"Waveform suffix", on page 1279.
Parameters:
<Value>
Usage: Asynchronous command
REFLevel<m>:ABSolute:TITube <Value>
Defines an area beneath the high signal level which is still considered to be high level.
Suffix:
<m>
.
Valid suf
fix numbers: 2 to 21, 61 to 68, 108 to 118, 151 to 157,
173 to 179
Source waveform of the measurement, see Chapter 24.4.1,
"Waveform suffix", on page 1279.
Parameters:
<Value>
Usage: Asynchronous command
REFLevel<m>:ABSolute:BITube <Value>
Defines an area above the low signal level which is still considered to be low level.
Suffix:
<m>
.
Valid suf
fix numbers: 2 to 21, 61 to 68, 108 to 118, 151 to 157,
173 to 179
Source waveform of the measurement, see Chapter 24.4.1,
"Waveform suffix", on page 1279.
Parameters:
<Value>
Automatic measurements