R&S RTO6 - Page 1575

Remote control commands
R&S
®
RTO6
1575User Manual 1801.6687.02 ─ 05
CALCulate:MATH<m>:FFT:GATE[:STATe] <State>
Enables FFT gating.
Suffix:
<m>
.
1..8
math waveform
Parameters:
<State> ON | OFF
*RST: OFF
Usage: Asynchronous command
CALCulate:MATH<m>:FFT:MAGNitude:LEVel <VerticalMax>
Defines the reference level for dB scaling.
Suffix:
<m>
.
1..8
Math waveform
Parameters:
<V
erticalMax> Range: -1E+15 to 1E+15
Increment: 0.01
*RST: 0
Default unit: div
Usage: Asynchronous command
CALCulate:MATH<m>:FFT:MAGNitude:RANGe <Range>
Defines the vertical value range in spectrum mode.
Suffix:
<m>
.
1..8
math waveform
Parameters:
<Range> Range: 1 to 500
Increment: 1
*RST: 100
Default unit: dB
Usage: Asynchronous command
CALCulate:MATH<m>:FFT:MAGNitude:SCALe <MagnitudeScale>
Defines the scaling of the y-axis for magnitude spectrums. The display values are valid
for 50Ω termination impendance.
Select the unit according to the vertical unit of the source waveform.
Spectrum analysis