R&S RTO6 - Page 1751

Remote control commands
R&S
®
RTO6
1751User Manual 1801.6687.02 ─ 05
BUS<m>:I2S:TRACk:TD5Ch <TDMCh5>
BUS<m>:I2S:TRACk:
TD6Ch
<TDMCh6>
BUS<m>:I2S:TRACk:TD7Ch <TDMCh7>
BUS<m>:I2S:TRACk:TD8Ch <TDMCh8>
Enables or disables the track of the indicated channel. The commands are relevant for
TDM audio data.
Suffix:
<m>
.
1..4
Selects the serial bus.
Parameters:
<TDMChX> ON | OFF
*RST: OFF
MEASurement<m>:TRACk[:STATe] <State>
Enables the track functionality and displays the track.
The track functionality requires at least one option, see "Enable (T
rack)"
on page 361.
Suffix:
<m>
.
1..10
See "Selection of the measurement group: MEASurement<m>"
on page 1479.
Parameters:
<State> ON |
OFF
*RST: OFF
Usage: Asynchronous command
MEASurement<m>:TRACk:DATA:HEADer?
Returns the header of the track.
Suffix:
<m>
.
1..10
See "Selection of the measurement group: MEASurement<m>"
on page 1479.
Usage: Query only
MEASurement<m>:TRACk:DATA:STYPe?
Returns the data type: TRK (track).
Suffix:
<m>
.
1..10
See "Selection of the measurement group: MEASurement<m>"
on page 1479.
Usage: Query only
Protocols